Which lighting technology is already installed

Before you plan to get the right work light, you opt to see what you already have. When you know the existing technology, only then you can get hold of new techniques. See what you desire:

1. is it about getting the 1 to 1 replacement of the already available lights
2. You want to enhance the light intensity of the current lights with a more powerful one

It is always better to switch to better lights like Xenon or LED.

The preferable working area to be illuminated

It all depends upon the intensity of light you require. The level of illumination varies as per user requirements.

You need to determine if you require narrow illumination for a longer range. or some short-range illumination pattern.

Sometimes the closer illumination might serve the purpose. The more the illumination range, the higher the intensity of light you require.

For improving illumination; Combining existing lights with another lighting technology

You have all chances to improve and enhance the illumination of your light through:

1. With the help of partial replacement
2. With adding more work lights

It’s better not to use the existing technology for that matter. You can even combine new LED lights with the existing Halogen lights.

This way you can keep low the capital outlay. You can also benefit from a greater luminous factor immediately.

For better vision, you need to install the lights in pairing.

Working of work light for longer periods in the dark

For your focus and better results, you need to have better and good luminous lighting. If Halogen lights are used for a longer duration, these can lead to fatigue.

The LED light on the other hand leads to better vision. For the human eye, the LED lights emerge as daylight.

Thus, the overall productivity towards the work improves and you give your best. Your eyes will feel less tired and your vision towards other lights also improves.

Demanding light for the outside conditions

As far as vibrations are concerned, both Xenon and Halogen are very sensitive. In case of more vibration, the filament within the light can also break.

This can cause danger for humans, animals, and other people in the working area. The LED lights can work for more than 130 hours.

The durability of the LED means the filament also remains intact and there is no issue of breaking up.

Lights and brightness of the lights-The Lumen

When a flux light emerges from a light source, there is a method to measure it. The unit for measuring light flux is lumen (lm). It means the response and sensitivity of the human eye to light.

The lumen output indicates the brightness of the light. It also tells how bright the light is perceived by the direct eye.

Due to the above, the lumen is considered better for checking brightness than wattage. The wattage on the other hand is only about checking the power of the light.

The same cannot be used to identify the level of brightness of the light. Following are the factors that measure the lumen of the light.

Even more important is quality!

For optimum working conditions, the homogenous light distribution matters a lot. This is better than the luminous flux of light, which is measured in the lumen.

You can check the overall quality of the light in terms of its NV. This is the new technology of light that ensures the even distribution of light. It allows the equal distribution of light leaving no shadow aside.

The Quality factors for a New Vision-Worklight

The quality of the lighting technology and interplay is essential for better light. This allows the space to be bright with no shadows aside.

1. Quality of the light sources

The durability of the light is dependent upon the selection and tough jobs. For LEDs, the light can stay for 60,000

2. Quality of the reflector system

In the case of homogenous light, the distribution of light is even. Even reflectors have been designed to reduce the focus issue of the light.

In the case of a strong range, the concentration of light is very high. And when the distance arises, the level of concentration also rises.

3. Quality of the lens material

The scratch-proof, resistant-free material and premium objects, keep light homogenous. Light also remains a focus in case of a collision with any similar object.

The New Vision reflector system

At the heart of NV is the reflecting system of lights.NV’s software assists in the design of the light system. It uses numerous light beams, mainly in millions for the said purpose.