Have you ever witnessed the truck after modification? You must have seen. The one thing that you would see in all trucks is a light bar on the front side.

If you are planning to get one light for your truck, you must go through this article. It is all about the light bar for your truck and how to select one.

Trending Light Bar for Your Truck

It is all about upgraded as well as factory-out lights for the truck. The same is true for A model truck, the Ford model which is out on a muddy road.

Mainly customers resolve their light issue by directly getting the factory headlights. It worked well, till the factory-owned halogen lights were introduced in the market.

The lights offer a real-world approach with a cool look. The look is much better than the 55 W halogen lights with headlight output.

Since the output of the light is better, still look for a replacement from the market. The process of power install keeps the entire process of installation intact.

LED light bars are a good source of light due to:

• Less operational temperature
• Better reliability
• Low cost with respect to power

For aftermarket, the LED lights remained very expensive. But thanks to the economy of scale concept. If you planned to have LED lights back in 2015.

You had to spend a considerable amount of dollars for that matter. But today, the situation is different. There are also many options available for the said purpose.

In the category of off-road LED lights, an LED light bar is the option available. The reliability of LED light is better than sealed beam or incandescents lights.

The level of vibration is much reduced with an isolator made with rubber. This improves the component lives. The brightness of the LED lights is also better than incandescent.

The installation options for LED lights are also many. It’s not just about headache rack fixation, this can be done in other areas as well.

Factors To Look For When Installing The LED light Bars

If you plan to go for the LED lights, make sure you are aware of your exact requirements.

So what is your aim b behind getting the LED lights? Do you intend to either go

• Camping
• Hunting
• 0ff-roading
• Any activity that requires working on roads late at night.

The visibility of the light bar is better than other available options. The output of the light can be measured in terms of lumens.

This way the effectiveness of the light can be determined well. Also, the reach of the light can be studied.

You should opt for the higher lumen from the light output. The selected one should be in your budget. You have to look for the style and size if looking for good looks.

If you are talking about wrangler, you have two options

• Either wrinkle coated finish light
• Matt light

Don’t go for the chrome bar housing light, it won’t look good. To determine the size of the light, check for the proper placement for installation.

The preferred mounting location includes:

• The roof of the cab
• Grille
• The front side of the bumper

Here is an article Where Is The Best Place To Mount LED Lights

You have to keep the wire to one side so it doesn’t look bad.

The requirement of the lights for the working vehicle would be different. The waterproof housing would be better to keep the internal parts safe.

You can also choose from the available light options as mentioned below

The Different Options of Light Bars

About the Size of the Light

Mainly 4 inches is the standard size of many lights. The light can be installed anywhere. Those 5 feet are supposed to be installed on the roof. You should not look for the biggest available size. It is all about the required size.

The Colors of the Light

It is not just about the size of the lights that matter. You should look for light that offers different colors.

You can choose the white light as well. But having different lights is good when there are other options.

You can keep blue light for an empty bed. How about green light for a fully loaded function.

The Bluetooth

Are you not find with the traditional switch? Then go for the Bluetooth app offered by some light bars. This is practical when you need to turn the light off in case of far off from the truck.

Go for Installing Kits

You need to see the associated features with your light bar. Some options come with just the light bar. There are others that come with other features. Important features are bolts, brackets, relay, nuts, wiring, and switch.

Installing the Light Bar

You only need the basic tools to install the Lightbar in your truck. Preferred sets are a hex key, a ratchet set, and a racket set.

Sometimes there isn’t any kit or wires are piecing together. Then, you would require either a crimper or cutter or could be multimeter. In case you intend to make your own hole, then you may need a drill.

If using the available hole, then a drill is not required.

Some instructions are also given with a light bar, you can go through those

1) Lay the wire harness in the engine by unraveling it. In the same manner where you want to use the wire. The connection of the wire is identified this way.

Also, the excess wire could be hidden. You can also route it through the driver’s seat. However, one can find other options as well.

2) Mount the light bar softly and check how it goes. Use the double-sided tape to keep it safe in case you drill holes.

The location should be aesthetically smart for targetting the light beam. You need to check it to ensure drilling the mounting holes properly.

How to Wire a Relay for Your Off-Road LED Lights

3) Now just connect and bolt it down. You should be accurate in terms of measurement because drilling would be just once. Also, tighten the bolts together.

Check for both negative and positive wiring connections. Run the wire through the firewall. It’s time to link the wire to the terminal. Link the positive wire to the battery side. Look for the solid ground for the negative terminal.

On the engine bay, the relay can work on any ground bolt. Mainly, one away from the heat and convenient in working should be used. You need not only rely on the switch of the factory.

You can also get help from the light bar beams. You can also look for the manual before opting for the light option.

4) At night, it is good to test the light bar. The preferred place could be either field or an empty parking area. The objective is to get the long-distance light bar.

You may share your personal experience of installing a light bar.