Skip to content 
Driving Light Legal: South Australia
Making Sure Your Auxiliary Spotlights or LED Light Bars are Legal Across Australia
You have to have perfect visibility for driving late at night. No matter which car you drive, your car should be equipped with a proper LED for clear vision.
The point is ever crucial if you are habitual in traveling in the countryside or rural areas.
Besides these, if you plan to get additional lights for your vehicle, you need to go through laws. There are laws that guide how many more lights your vehicle can have.
It is not possible to memorize each and every law, thus going through the official website is better. The same is true for Australia, as law varies from one country to the other.
In SOUTH AUSTRALIA, you can fit additional lighting to your vehicle without approval provided the lights comply with relevant Australian Design Rules (ADRs). There are further guidelines including:
Number of Lights
In South Australia, you are allowed to get a maximum of four lights. The four lights can be in the forward-facing direction. All four lights can come in a combo form.
For instance, two could be LED light bars and the other as spotlights. In the case of all LED light together, one light act as a single Lamp.
All LED lights come in one form and are taken as a single entity. In the case of multiple lights with single switching, it would be taken as a single lamp.
The Fittings of Lights
The fitting of the lights should not pose any hazard to pedestrians. It should not be protruding in any way. In case of light protrusion, it could injure any pedestrians.
The same is even not allowed in the law of the road and traffic. You can get the additional lights on the top of the roof. This way it is acceptable and also safe from causing any accidents.
The government of South Australia allows the installation of additional lights. These should be fitted in pairs and also at an adequate distance from each other.
You also need to ensure the proper symmetry of these additional lights. Also, proper matching for the pairing of lights should be there for your vehicle.
The operations of Lights
The installation of the additional lights should also be in line with the law. These should only work when the high-beam LED lights are turned on.
Similarly, the lights should turn off with the beam lights. In other words, the additional lights are linked with high-beam LED lights.
The switch of the additional lights can be separated. However, the power source of these lights comes from LED beam lights.
Type of Lights
The type of additional lights for your vehicle is also specified in South Australia. As per rules, you can only have white lights as additional lights for your vehicle.
There are different and many lights with each vendor. The lights could vary accordingly. Some are light bars as well as some specific lamps.
The type of these lamps also varies on the basis of legal fitments and their application. You can check out our full range here: New Vision Driving Light Range
To get an insight into these different lights, you have to check the company’s website.
For installation purposes, you have to check the local laws in Australia. It is true that laws working in one state don’t apply in the other state. Thus, you have to be pretty alert and prudent when planning in this regard.
The light beam and its refection should also be in line with the visibility of the driver and other cars. You need to address all aspects when getting additional beams for your cars.
