Skip to content 
Driving Light Legal: Victoria
Making Sure Your Auxiliary Spotlights or LED Light Bars are Legal Across Australia
You have to have perfect visibility for driving late at night. No matter which car you drive, your car should be equipped with a proper LED for clear vision. The point is ever crucial if you are habitual of traveling in the countryside or rural areas.
Besides these, if you plan to get additional lights for your vehicle, you need to go through laws. There are laws that guide how many more lights your vehicle can have.
It is not possible to memorize each and every law, thus going through the official website is better.. Same is true for Australia, as law varies from one country to the other.
We’re kicking it off with VICTORIA:
Number of Lights
In Victoria, you are allowed to get a maximum of four lights. The four lights can be in the forward-facing direction. All four lights can come in a combo form.
For instance, two could be LED light bars and the other as spotlights. In the case of all LED light together, one light act as a single Lamp.
All LED lights come in one form and are taken as a single entity. In the case of multiple lights with single switching, it would be taken as a single lamp.
Fitting of Lights
The fitting of the lights is such it should not look all jumbled up. CVs on the top sometimes look hazardous and dangerous for pedestrians.
The installation of the lights on the top of the vehicle should not be projected dangerously. The same should not look protruding on the top of the vehicle.
The fitting of the LED lights should be on the front of the vehicle. At the same time, these must be asymmetrically connected to the middle of the vehicle.
If you plan to get only one light, it should be mounted exactly in the center of the vehicle. The placement of the LED light at the appropriate point in the vehicle is very crucial.
It should be mounted so that the driver remains safe. Safety should be either reflection of the light or from any distraction.
The information provided by us is correct as of September 2021. As mentioned, it is worthwhile keeping up to date with local laws as they are subject to change. To check out the Vic Roads page on additional lights, click here:
https://www.vicroads.vic.gov.au/safety-and-road-rules/vehicle-safety/fog-and-driving-lights
Operation of Lights
The operation of the additional lights also depends upon their operations. All should be mounted such that the working of the Light beam is with the main lights.
Mainly along with the high beam, the additional lights should either turn on or turn off.
The working of the additional LED beams should be in line with the high beam lights.
In case of use of an additional beam, the distance should be not less than 200 meters.
This distance of 200 m should be from the forward as well as the backward vehicle.
Type of Lights
The type of additional lights for your vehicle is also specified in Victoria. As per the rules, you can only have white lights as additional lights for your vehicle.
There are different and many lights with each vendor. The lights could vary accordingly. Some are light bars, LED driving lights, as well as some specific lamps.
The type of these lamps also varies on the basis of legal fitments and their application.
To get an insight into these different lights, you have to check the company’s website.
For installation purposes, you have to check the local laws in Australia. It is true that laws working in one state don’t apply in the other state.
Thus, you have to be pretty alert and prudent when planning in this regard.
The light beam and its reflection should also be in line with the visibility of the driver and other cars. You need to address all aspects when getting additional beams for your cars.
