In order to install and use the light correctly, please read the instruction carefully after unpacking, to ensure the security and durability of the lights.

1. Light Structure and Features

1. 1. This light is unique, novel. Its back cover, front cover, lamp housing, side cover, and lens can be separated, its bracket is guide-rail structure, easy to install and replace.
   2. The shell is die-casted by high-purity aluminum alloy. Its surface is electrostatic sprayed and solidified in constant temperature so that its adhesion force is strong.
   3. It adopts a unique guide-rail structure, with good function of heavy shock-proof. (shown in the drawing right)
   4. It has good waterproof, dustproof, and shock-proof.
   5. It adopts a CREE LED chip.

2. Using Range

Applying to automobiles, trucks, off-road vehicles, excavators, agricultural machinery, marine machinery, etc.

Product specification:

1. Beam types: Flood beam/Spot beam
2. Color temperature: 5000K, 6500K
3. Dust-proof, Waterproof: IP67
4. Material:6063Aluminum profile shell, PC lens, stainless steel bracket

3. Installing Requirement& Maintenance

1. 1. First of all, all the components and accessories should be organized.
   2. Before installation, test the light to make sure it can work properly. (Red line is positive, the black line is negative.)
   3. First, install the hex nuts on the bolts, and twist the spring meson (show as the drawing below left)
   4. Make the bolts go through the mounting holes, and set into the spring meson, and then tighten the hex nut. (as the drawing below right)
   5. Connect the power line to the corresponding power connector.
   6. Finally, make sure the light is installed steadily, and then start the power.

4. Notes

1. 1. It is unqualified if there was breakage in the light shell or glass/plastic cup; the light should not be used.
   2. When installing, the power should be cut off to avoid injury to the body.

Click here to learn more about this light bar