This brand new premium L.E.D Awning/Scene light is the ideal lighting solution for a host of applications including camper trailers, caravans, utility service bodies, transport and emergency services vehicles.

8″ LED Awning/Scene Light – 3000 Lumens

Featuring high-powered Osram’s LEDs, they produce a broad flood of crisp white light with low power draw and their low profile and sleek design means they can be mounted in areas where space is limited.

Completely weatherproof they feature a robust aluminum housing, contoured black with an IP rating of IP67, meaning they are ideally suited to external fitment.

Where others are cutting back, NV is investing in the best quality. Here you can see in detail why supposedly cheap offers from discounters can become expensive.

Surface coating – Black Powder Coated

High-quality coatings protect the aluminum components of NV LED work lights from salt and chemicals and therefore from corrosion.

Corrosion can ruin the seal on lights. In the worst case, water can penetrate and destroy the electronics.

Thermal management (PCBA)

The thermal management of NV LED worklights is thoroughly calculated:

The heat of the LEDs is evenly distributed and dissipated via the housing.

If there is a risk of overheating, individual LEDs are automatically dimmed. This ensures that the LEDs do not overheat, thus allowing a longer design life to be attained.

Without thermal management, LEDs can very quickly overheat.

This makes their design life drop dramatically. Hot spots can deform the entire electronics board, soldering connections can break, causing the complete light to fail.

Electromagnetic compatibility (EMC)

The LED arrangement in NV’s awning/scene light and the construction of the reflector ensures that no interference occurs from magnetic fields.

LED awning/scene lights that are not correctly shielded, produce strong electromagnetic fields which interfere with the vehicle’s electronics, radio and GPS.

Light distribution via the reflector system- Lens/Reflector

The reflectors of New Vision LED awning/scene lights are calculated in such a way to ensure that the working area is evenly illuminated and the light optimally used.

With an asymmetric lens, the patterns make sure the beam pattern more focused towards the ground, to prevent glare and eye fatigue, which means it will help to generate safer working environments and reduces operator fatigue.

LED awning/scene lights with an unsuitable light control system illuminate the working area unevenly and waste most of the light. Brighter spots distract your eyes, making other details difficult to see.

Overvoltage / lowvoltage protection

Supplement to the electronics for protecting the LED against high voltage/current in the vehicle’s electric system as per ISO 7637-2.

Overloading of the LEDs can be caused by voltage peaks in the vehicle because of:

• Jump-starting
• Faulty control units
• Load dump impulse (incorrect battery contact)

These can stress or damage the LED, which can lead to a failure or a reduction in the design life.

By supplementing the circuit with appropriate components, it can be protected, so that the service life is extended and failures are prevented.

Lens material

The lens of NV awning/scene lights, which is 100% suitable for daily use, is made of high-quality, impact, and scratch-proof polycarbonate.

The light emitted remains homogeneous, even after colliding with a branch or anything similar.

Lenses made of inferior plastic can break and scratch easily. Each scratch leads to undesired light refraction – the more scratches there are, the more irregular the illumination is.