The safety Halo system with NV-F13. for Forklift Warehouse. There is a danger halo zone light, red / blue in color for the material and handling of the forklift.

There is also a no go area that has a side warning light. For better fitting into the tight areas, you have to have smaller compact units.

The areas that require proper light are:

• Workplace walkway
• Walkway crossings
• Workplace intersections
• The danger lines at the production place

You have to have a level of brightness of at least 30 percent more than the normal lights. There are different other applications in the light as well. It also creates a safe working environment in the warehouse. And make the night working place brighten.

You also have to show the staff about the danger zone and areas while working. These lights are said to be the brightest lights for the Red / Blue zone. The light is believed to be 30 percent brighten than the normal light.

The warehouses’ safety. We are the first one to come up with these lights in the Chinese market.

There are different safety lights for the warehouse. With Red light, the safety warning is triggered in the mind. You will have no maintenance system, once the system is successfully installed.

You can very well call the company in case of any confusion. There are other forklift LED series side lights for pedestrians. They have Halo lights for ensuring safety at the workplace.

These are mainly for the material handling process. This way one is able to ensure the necessary safety element. This is especially true for pedestrians, especially around mobile vicinity.

The lights can be used as a supplementary safety device. This is in addition to the warning light of 360 degrees.

This gives way to the Red light which gives a beam of 290 lumens line. The beam can go as far as to both sides of the ground.

There is a DC operator with a 9-80C configuration. It also has a polycarbonate lens with aluminum housing. The resistance of NV-F13 is extreme.

It also has more impact on damage through vibration. The ingress of this configuration is the IP67 production rate.

There are numerous applications of this light. You need to come up with A go area in that zone. It doesn’t require any more painting on the floor. The production line is used for mounting purposes. You can save a big amount on maintenance as well.

For the creation of a 3/4 safety hub, You need to have at least 3 lights. The price is charged as per light. You can get an optional mounting bracket.

About The Danger Zone-Red Light Area

In all pedestrian accidents, 40 percent occur due to forklifts. With Red lights, pedestrians are ensured to keep away from the accident site.

The Red bright light is put on the floor, near the forklift and to keep pedestrians alert. That area can also be called a Red zone Halo light area.

One can avoid any injury in that case around the red zone area. Every company can opt for the no-zone Halo area at a safe distance. The safest distance in this regard is around 1 Meter, the same can also be increased.

You can avail services of auto electricians around the ignition for the said purpose. When the ignition is turned on, the light starts working. The power requirement is also less so there is no need for heavy wires.

Part Number: NV-F13
Number of LED’s Quality: 6 x 3 Watt
Light Output: 290lm Red Line Beam
Watts: 18 Watts
Input Voltage: 10-80 Volt DC
Current Draw: 1.05Amps @ 12 Volt DC. 0.50Amps @ 24 Volt DC
IP Rating: IP67 Water & Dust Proof
Vibration Rating: Vibration Resistant 7g
Housing Construction: Die Cast Aluminium
Lens Construction: Polycarbonate
Dimensions: 96 x 70 x 75mm
Operation Temperature: -40 to +65 Degree C
Warranty: 1 Year
Approval: ECE R10

Forklifts For Red Halo Zone Proximity Lights

The red halo lights for safety are being used for indoor forklifts. The same be used for multiple purposes on forklifts, like:

• Stand-ups
• Sitting downs
• Tuggers

The halo perimeter lights of red safety can also be used for gas, electric, and fuel forklifts. One can take out of the red zone lights because these are weatherproof.

But these can not be used in the open, sunlight due to these being less brighten. However, these are better when used at night, dawn time, and dust.

You cannot rate the light hazard area because these are not UL rated. You can also mix the red zone light with other lights when in use.

The lights are easy to install. You need not have any mounting mechanism. These are pretty sage to install.

Caution

All lights must follow National as well as International standards of wiring. It must be done by licensed electricians. It should also meet all local codes, state codes as well as NEC (National Electric Code).

In case of an improper installation, accidents could occur.

There might be some parts susceptible to ESD, i.e., electrostatic discharge

One can also use surge protective devices. These are installed in the light of a safe power surge.

The aim of the danger light is to highlight the visual clues regarding the danger zone. The areas could be near assets, personnel, and around equipment.

The light area need not provide any collision or physical avoidance. For effective working, proper installation is essential.