Troubleshooting Guide for LED Rock Lights
Are you facing issues with the rock lights? If so, you’re not alone because buyers sometimes face issues with putting the rock lights into work.
However, you don’t have to worry because this guide will help you troubleshoot the issues and hit the road in no time.
What Are Rock Lights
They are the most famous accessories for off-road vehicles like Jeep’s wheel wells. Usually, these lights are placed on the wheel wells, but you can install them in other places of the vehicle as well.
Rock lights are worth considering if you’re fond of installing color-changing rock lights to match your music while you drive.
There are rock light kits with 4 to 8 pieces. They come with wireless controls and Bluetooth. Each rock light kit has a control box for Bluetooth.
The BLEDIM app is free and helps you customize as you please. You can change the patterns and colors of the rock lights just by using your smartphone as you have the BLEDIM app in it.
This troubleshooting guide will discuss the two common questions buyers often find when installing their super bright rock lights.
Or, if you have any other problems or issues even after reading this guide, you can talk to us.
The Troubleshooting Guide Talks About The Following Products
- Bluetooth + BLEDIM APP Underbody Rock Light Kit – 8 Piece
- Bluetooth + BLEDIM APP Underbody Rock Light Kit – 4 Piece
IMPORTANT: You must ensure that Control Box has a12V Power and the App’s latest version installed. This must be taken into consideration before you troubleshoot.
Some buyers report that they have connectivity issues with their crawler LED rock light kits. We will provide a troubleshooting guide for the popular issues related to rock lights. So this guide is aimed at rock light kits with 4 to 8 pieces.
Problem 1 – How to Solve Connectivity Issue
You should follow these steps if you’re facing connectivity issues or your rock lights respond to the App’s commands.
- Firstly, app resetting will help. Go to settings in your smartphone, reset, and re-open it.
- Disconnect your rock light Control Box, let it remain disconnected for around 10 seconds. Then, reconnect it.
- Make sure that you have enabled the Bluetooth function on your phone. Go to device settings, click Bluetooth settings. (Device settings > Bluetooth Settings). See Image 1
- Make sure that you have paired the rock light Controller. Check the app settings in your BLEDIM app. See Image 2
- Check whether your phone has the latest version of the software.
- If you’re not using the latest version, try deleting and reinstalling the app.
- If the issue has not been solved, contact us.
Image 1
Image 2
Problem 2 – How to Solve Mismatched Color Issue
Another common issue faced by buyers is mismatched light pods with their rock light kits. This can be one of the most frustrating problems.
But this guide will help you troubleshoot the issue. If the problem persists even after trying out this, please feel free to contact us.
Every offroad underbody rock light kit has its own light pod. So if you are facing problems with light pods, like mismatched colors or not powering on, you can follow the following procedures:
- Find the plug which connects the light pod that has the color or connectivity issue. Then, make sure that the arrows are perfectly aligned on the sides of it. See Image 3
- Once detected, unplug it and use another output in the control box. This might work if it’s an output issue.
- Find whether there are frayed wires or damaged cables between the damaged pod and the light control box.
As mentioned earlier, if you cannot solve it, please get in touch with us.
Image 3
Are You Looking for Ideal Rock Lights? We’ve Got It For You!
Let alone troubleshoot; if you haven’t found the right four wheeler rock lights for you, we’ve got it for you. This is the right place to look for ideal rock lights that fit your budget and requirements.
You can customize your wheel wells with the perfect rock lights that match any occasion. While you purchase rock lights, you can also find other accessories such as magnet adapters for rock lights and Extension Cables.
If you purchase the magnet adapters, you will be able to fasten the installation as it offers more customization. Here is an installation guide
It’s great for you if you want to try them on larger vehicles. You can mix and match rock lights with other products to bring out the best output.
If you want to install the rock lights quickly and correctly, check out our guide, and it will take you through the steps to installing these lights with no experience.
You don’t have to head out to purchase additional tools because rock light kits include hardware as well.
Or are you interested in other types of lighting options? Well, we’ve got various collections so you can find something that matches your needs and style.
Question 1:
I’ve tried all the ways to fix that you guys give on this page…. All my rock lights are turning on and I’ve checked connections and have unplugged the problem light and plugged it back in.
The problem I am facing is on all other pods they will turn to the color I want. But on the front driver side it will only turn to match a certain color…ex blue or light blue.
On any other color it will turn to the opposite color of the one that I have chosen.
Just looking to see if there is any way to fix it…. Thanks
Answer 1:
Per your mentioned, your rock lights can not fix it, they can not turn to the color you want means that stop “working”
I have Tried All Of The Above and More I Still can’t connect the Bluetooth Via the App. My phone Recognized the Bluetooth But the App Doesn’t.
My lights work great until I turn my car on. Then they flicker and flash and none of the colors match up
I have lighting. The color was great until I pushed something and now the colors are whitewashed ???? I want the deep saturation I had but cannot get the lights to reset. I have disconnected them for hours from the battery but they will not reset! HEEEELLLP! They look faded
Hi Lisa
You could read your current supplier’s instructions or contact them to fix it. Different suppliers with different APP
I’ve got 3 pods that will not turn off by remote and will not change color