Skip to content 
Where Is The Best Place To Mount LED Lights?
During winters with darkness approaching, the need for LED lights becomes even more. With you moving away from the urban side, the requirement for light becomes more.
When you travel on the roadside, you get to see how poor your road light is.
If your car lights are not properly illuminated, there are chances you will drag into any car. If you accidentally get off the pavement, you will smash into something big.
In the absence of fewer lights, life can be really scary at times.
Now with the help of LED, you have the liberty to add more lumens to your system. The LED lights are very unique. It is due to this quality that it is available in different sizes and designs.
Apart from this, the lights are durable, resistant, and able to give out good light. There are some manufacturers making good lights. Thus, LED lights are extremely useful and preferred means.
Yet another factor concerning LED lights is their availability in numerous sizes. Some light bars are able to give out as much as 50 inches long light. For the small sizes, these are as small as few diameters in inches.
Even between these smaller and larger sizes, you can find many other sizes. It means the LED lights can be mounted anywhere.
But one needs to see what is the appropriate location for mounting the LED lights.
On the Roof-mounted or on Top of Windshield
For the LED lights, the roof is the preferred place for mounting the light. It is because the more away the light is mounted, the illumination goes far away. The location is ideal for the massive spread of light.
Apart from this, there wasn’t any other location on the vehicle for fit in this light. The light is of around 40 to 50 inches light bar. For any light bar, the bigger light is considered better.
When Mounting Light Bars On The Windshield, There Are Some Disadvantages:
1) The biggest disadvantage is wind pollution. On the top of the windscreen, a lot of airflows. When the light bar is attached on the way, it can create a lot of noise.
However, based on the shape of the vehicle and the size of the light bar, the amount of noise vary.
2) Mounting also needs to be considered. There are no bolts installed in windscreens in some vehicles except for a jeep. In the absence of any bolt, the light has to be drilled.
In case you drill in areas where water mainly flows, can become sketchy at moments. The drill won’t go anywhere even if you remove the light bars from them.
Then the separate place to get wires to the vehicle battery is also required to be dealt with.
3) The third point is the quantity of glare any light bar generates when installed. Mainly light emerging from the light bar is enormous. The same can be pretty negative in some cases.
Ditch Lights or A-Pillar
For the Overlanding crowds, the pillar or ditch light is essential. For usage, you need not have either special tents or roof tents. In case you move on twisting road or deer country, these make an excellent choice.
In case of proper installation, the ditch light can illuminate well the area ahead. The same can lighten up the corners as well.
The light has to be at 180 degrees angle if you intend to see all the areas around. For an A-pillar, you tend to go for the LED Work Lights Side Shooter.
So far there are as such no drawbacks in getting the ditch lights. The special mounting requirements make them specialize for some specific vehicles only.
The lights do make noise as well but that is up to the minimum level. Since ditch lights are on a minimum level, these at times don’t make more noise.
When the ditch lights are used in straight positions, their effectivity affects. The hood in a vehicle thus blocks the illumination of the lights.
It is to be noted that ditch lights lighten the sides of the vehicle. These are never meant to illuminate the front side. You need to aim them properly so these could be lead to better light spread.
The Grille
Some vehicles come with LED lights mounted in the grills. New Vision Company has expertise in this regard. The look of the light is pretty clean and it gives out enough light to the road ahead.
However, one needs to consider numerous things for getting grilled LED lights mounted. You cannot mount the light within the grill, due to the grill being not very strong.
In some vehicles, there are single rows of LED lights. These keep the grills from getting overloaded.
Yet another option is to use the backside of the grill rather than mounting light on it. The vehicle has to have enough space behind the grill in that matter.
There are, however, fewer vehicles in the market with enough space. The space has to be enormous in that case.
Also in case of much back, the illumination of the light will also be impacted. If the design is even open, it might still block some amount of light from coming out. You need to use letter-quality LED lights in that case for better vision.
For The Fog Lights
You also have to upgrade the factory fog lights also. Many companies have come up with fog lights that have replaced the old lights. There are some designs that are easy to use.
The other style comes with easy-to-use mounting capabilities. Like our Cube LED Work Lights Series has a better lumen. This lumen in return uses better illumination.
In the case of a fog light on a bumper, it tends to stay low. The light is directed low hanging position in case you require it. When the lights are glared low, they tend to bother less on the eyes.
Similarly, there are fewer chances of such lights bouncing back to your vehicle. The colour of the fog light should be amber or yellow. It reduces the glare on the eyes.
The theory is applicable in case of any dusty situation as well. It is thus, pretty wise to upgrade such lights.
Front Bumper
The front bumper is the preferred place for mounting any LED light. The placement of the lights on the bumper is perfect and appropriate as per the requirement of the glare.
Like the hood, there are no chances of light being bounced back. You can keep the wire hidden as well and they won’t appear open.
Similarly, it would be easier to connect the wire to the battery of the vehicle. When the light is installed on the front side of the bumper, it doesn’t even cause noise pollution.
There are cutouts options for different aftermarket bumpers. The setting allows for a clean and clear spread of extra lights.
There are yes, some disadvantages as well for mounting the light to the front bumper. It can hamper the airflow to the radiator. It mainly happens when the front bumper is bombarded with many LED lights. It also depends upon the use of the vehicle.
If you have smaller lights and you use the vehicle heavily, this can also stop airflow to the radiator. Sometimes when more lights are installed on the front bumper, it raises the temperature. In that case, you need to take off some lights and then check the work.
Rear Bumper
Riders tend to focus on the front illumination of the vehicle. In the absence of any backlight, reversing can be dangerous. The LED light mounting on the rare bumper is not that easy. You can not have extra lights in this case.
You can have flush mounting LED lights as an alternative. The same is true for Flush Mount LED Work Lights. The process requires some cutting and a specific skill set. Whereas the advantages are many, like:
- Clear departure angle
- The clean and neat look
- Enough light/illumination
Under The Cars
Considering the technical trails, the placement of tires is very critical.
Sometimes, you are not able to see the tires at night time, when the light is not enough. It is also because many people put lights on the front of the vehicle.
You sometimes require light on the below position of the vehicle. The rock lights are supposed to do wonders in that case. With these, the wheeling at night time becomes easy.
Rock lights are used for crawling or low-speed vehicles.
Since the size of the tire is small, it is able to fit anywhere. It is better to keep them in the wheel wells. This way you get better space for changing a flat tire.
Also can easily manage to repair of the vehicle. You can also use the same for interior lights or under the hood.
Sometimes people have also been seen putting them under a shell or in the pickup bed position. Rock lights are not just meant for rocky places. These are for any place that requires more and clear light.
